How to remove window tint |
Untitled Document
|
If you have peeling tint on the side windows of your car and just want to remove it, you don\'t need to pay an exorbitant amount of cash to some hack at a shop. Follow these simple guidelines to learn how to do yourself.
The difficult thing about removing tint is that most film is constructed of two layers of tinted polyester. When you try to peel the film off the glass, the top layer will usually pull right off leaving the second layer behind. This second layer will not peel off, it will just flake and tear like a price tag.
How to remove window tint - First, gather your tools and supplies. Some type of knife will be needed to strip the film. A utility knife with a wide blade or an X-ActoŽ knife would do the job. Make sure you have several black thirty gallon trash bags available. The bigger the bag, the easier it will be to cut it to fit the size of your car window. You will also need fine steel wool pads, paper towels, glass cleaner, a drop cloth, and ammonia. If you prefer not to use straight ammonia because of the smell and inhalation hazards, choose a general cleaning product that contains ammonia. These will do, but read the label to make sure that ammonia is an ingredient.
Note - How to remove window tint
You are more than likely to damage one or more of your defroster lines, when this happens, the cut line will not work anymore. Some cars have radio antennas mounted alongside the defrosters made of the same material. If you damage these, your radio antenna will not work! Be careful! Taking it to a tint shop to be done greatly increases the odds of saving the lines, but even a tint shop can not promise to save your lines, sometimes the film is just too far gone.
Tips - How to remove window tint
Soaking is not nessesary here. You may want to use a simple razorblade holder. Cut a notch onto the upper area of the film so that you have a piece to pull. Try to peel the film, it will probably come off in two or three pieces. Spray the remaining adhesive with soapy water, and scrape the adhesive off with a razor blade, avoiding the edges of the glass until last to keep the blade sharp. You may need to use a few blades as they dull quickly. Finish up with window cleaner and paper towels. Inspect for missed glue (its clear and hard to see)
All window film deteriorates with age and eventually have to be removed. Two of the most common symptoms of dying film are the dreaded "purple film" and the "bubbling film".
Purple film is caused by non-metallic dyes in the film breaking down and changing color. Bubbling film is a sign that the adhesive used to apply the tint to the window is failing. After a single bubble appears, many more will follow.
Here we have covered the topic on How to remove window tint
|
|